FecFrame V. Roca Internet-Draft M. Cunche Intended status: Standards Track INRIA Expires: January 4, 2010 J. Lacan ISAE/LAAS-CNRS July 3, 2009 LDPC-Staircase Forward Error Correction (FEC) Schemes for FECFRAME draft-roca-fecframe-ldpc-00 Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on January 4, 2010. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. Roca, et al. Expires January 4, 2010 [Page 1] Internet-Draft LDPC-Staircase FEC Schemes July 2009 This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents in effect on the date of publication of this document (http://trustee.ietf.org/license-info). Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Roca, et al. Expires January 4, 2010 [Page 2] Internet-Draft LDPC-Staircase FEC Schemes July 2009 Abstract This document describes two fully-specified FEC schemes for LDPC- Staircase codes that can be used to protect media streams along the lines defined by the FECFRAME framework. It inherits from RFC5170 the specifications of LDPC-Staircase codes. More specifically, these codes belong to the well-known class of "Low Density Parity Check" codes. They are large block FEC codes, in the sense of RFC3453, since they can efficiently deal with a large number of source symbols. They are also systematic codes, since the source symbols are part of the encoding symbols. Finally, they can perform close to ideal codes in many use-cases, since decoding is often possible after receiving a small number of encoding symbols in addition to the strict minimum, while keeping very high encoding and decoding throughputs with a software codec. LDPC-Staircase codes are therefore a good solution for the protection of high bitrate ADU flows, or when several mid-bitrate flows are protected together by a single FECFRAME instance. They are also a good solution whenever the processing load of a software encoder or decoder must be kept to a minimum. The first scheme describes the use of LDPC-Staircase codes in a FECFRAME instance in order to protect arbitrary ADU flows. The second scheme is similar to the first scheme, with the exception that it is for a single sequenced ADU flow. Roca, et al. Expires January 4, 2010 [Page 3] Internet-Draft LDPC-Staircase FEC Schemes July 2009 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. Definitions Notations and Abbreviations . . . . . . . . . . . 8 3.1. Definitions . . . . . . . . . . . . . . . . . . . . . . . 8 3.2. Notations . . . . . . . . . . . . . . . . . . . . . . . . 10 3.3. Abbreviations . . . . . . . . . . . . . . . . . . . . . . 11 4. Common Procedures Related to the ADU Block and Source Block Creation . . . . . . . . . . . . . . . . . . . . . . . . 12 4.1. Problem Statement and Related Constraints . . . . . . . . 12 4.2. Source Block Creation . . . . . . . . . . . . . . . . . . 13 5. LDPC-Staircase FEC Scheme for Arbitrary ADU Flows . . . . . . 15 5.1. Formats and Codes . . . . . . . . . . . . . . . . . . . . 15 5.1.1. FEC Framework Configuration Information . . . . . . . 15 5.1.2. Explicit Source FEC Payload ID . . . . . . . . . . . . 16 5.1.3. Repair FEC Payload ID . . . . . . . . . . . . . . . . 17 5.2. Procedures . . . . . . . . . . . . . . . . . . . . . . . . 18 5.3. FEC Code Specification . . . . . . . . . . . . . . . . . . 18 6. LDPC-Staircase FEC Scheme for a Single Sequenced Flow . . . . 19 7. Security Considerations . . . . . . . . . . . . . . . . . . . 20 7.1. Problem Statement . . . . . . . . . . . . . . . . . . . . 20 7.2. Attacks Against the Data Flow . . . . . . . . . . . . . . 20 7.2.1. Access to Confidential Objects . . . . . . . . . . . . 20 7.2.2. Content Corruption . . . . . . . . . . . . . . . . . . 20 7.3. Attacks Against the FEC Parameters . . . . . . . . . . . . 21 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 23 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 24 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 25 10.1. Normative References . . . . . . . . . . . . . . . . . . . 25 10.2. Informative References . . . . . . . . . . . . . . . . . . 25 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 27 Roca, et al. Expires January 4, 2010 [Page 4] Internet-Draft LDPC-Staircase FEC Schemes July 2009 1. Introduction The use of Forward Error Correction (FEC) codes is a classic solution to improve the reliability of unicast, multicast and broadcast Content Delivery Protocols (CDP) and applications [RFC3453]. The [FECFRAME-FRAMEWORK] document describes a generic framework to use FEC schemes with media delivery applications, and for instance with real-time streaming media applications based on the RTP real-time protocol. Similarly the [RFC5052] document describes a generic framework to use FEC schemes with with objects (e.g., files) delivery applications based on the ALC [RMT-PI-ALC] and NORM [RMT-PI-NORM] reliable multicast transport protocols. More specifically, the [RFC5053] (Raptor) and [RFC5170] (LDPC- Staircase and LDPC-Triangle) FEC schemes introduce erasure codes based on sparse parity check matrices for object delivery protocols like ALC and NORM. Similarly, the [RFC5510] document introduces Reed-Solomon codes based on Vandermonde matrices for the same object delivery protocols. All these codes are systematic codes, meaning that the k source symbols are part of the n encoding symbols. Additionally, the Reed-Solomon FEC codes belong to the class of Maximum Distance Separable (MDS) codes that are optimal in terms of erasure recovery capabilities. It means that a receiver can recover the k source symbols from any set of exactly k encoding symbols out of n. This is not the case with either Raptor or LDPC-Staircase codes, and these codes require a certain number of encoding symbols in excess to k. However, this number is small in practice when an appropriate decoding scheme is used at the receiver [SPSC08]. Another key difference is the high encoding/decoding complexity of Reed-Solomon codecs compared to Raptor or LDPC-Staircase codes. A difference of an order of magnitude or more in terms of decoding speed is often noticed between Reed-Solomon and LDPC-Staircase software decoders [SPSC08]. The present document focuses on LDPC-Staircase codes. Because of their key features, these codes are a good solution for the protection of high bitrate source flows, for instance when several mid-rate ADU flows are globally protected by a single FECFRAME instance. They are also a good solution whenever processing requirements at a software encoder or decoder must be kept to a minimum, no matter the ADU flow(s) bitrate. This documents inherits from [RFC5170] the specifications of the core LDPC-Staircase codes. Therefore this document specifies only the information specific to the FECFRAME context and refers to [RFC5170] for the core specifications of the codes. To that purpose, the present document introduces two schemes: Roca, et al. Expires January 4, 2010 [Page 5] Internet-Draft LDPC-Staircase FEC Schemes July 2009 o The first scheme describes the use of LDPC-Staircase codes in a FECFRAME instance in order to protect arbitrary ADU flows. o The second scheme is similar to the first scheme, with the exception that it is for a single sequenced ADU flow. Finally, a publicly available reference implementation of these codes is available and distributed under a GNU/LGPL (Lesser General Public License) [LDPC-codec]. Roca, et al. Expires January 4, 2010 [Page 6] Internet-Draft LDPC-Staircase FEC Schemes July 2009 2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. Roca, et al. Expires January 4, 2010 [Page 7] Internet-Draft LDPC-Staircase FEC Schemes July 2009 3. Definitions Notations and Abbreviations 3.1. Definitions This document uses the following terms and definitions. Some of them are FEC scheme specific and are in line with [RFC5052]: Source symbol: unit of data used during the encoding process. Encoding symbol: unit of data generated by the encoding process. With systematic codes, source symbols are part of the encoding symbols. Repair symbol: encoding symbol that is not a source symbol. Code rate: the k/n ratio, i.e., the ratio between the number of source symbols and the number of encoding symbols. By definition, the code rate is such that: 0 < code rate <= 1. A code rate close to 1 indicates that a small number of repair symbols have been produced during the encoding process. Systematic code: FEC code in which the source symbols are part of the encoding symbols. The Reed-Solomon codes introduced in this document are systematic. Source block: a block of k source symbols that are considered together for the encoding. Packet Erasure Channel: a communication path where packets are either dropped (e.g., by a congested router, or because the number of transmission errors exceeds the correction capabilities of the physical layer codes) or received. When a packet is received, it is assumed that this packet is not corrupted. Some of them are FECFRAME framework specific and are in line with [FECFRAME-FRAMEWORK]: Application Data Unit (ADU): a unit of data coming from (sender) or given to (receiver) the media delivery application. Depending on the use-case, an ADU may use an RTP encapsulation. (Source) ADU Flow: a flow of ADUs from a media delivery application and to which FEC protection is applied. Depending on the use- case, several ADU flows can be protected together by the FECFRAME framework. Roca, et al. Expires January 4, 2010 [Page 8] Internet-Draft LDPC-Staircase FEC Schemes July 2009 ADU Block: a set of ADUs that are considered together by the FECFRAME instance for the purpose of the FEC scheme. Along with the F[], L[], and Pad[] fields, they form the set of source symbols over which FEC encoding will be performed (either in a global way or separately depending on the FEC scheme used). ADU Information (ADUI): a unit of data constituted by the ADU and the associated Flow ID, Length and Padding fields (Section 4.2) This is the unit of data that is used to define source symbols. FEC Framework Configuration Information: the FEC scheme specific information that enables the synchronization of the FECFRAME sender and receiver instances. FEC Source Packet: a data packet submitted to (sender) or received from (receiver) the transport protocol. It contains an ADU along with its optional Explicit Source FEC Payload ID, when applicable. FEC Repair Packet: a repair packet submitted to (sender) or received from (receiver) the transport protocol. It contains a repair symbol along with its Repair FEC Payload ID. The above terminology is illustrated in Figure 1 from the sender point of view: Roca, et al. Expires January 4, 2010 [Page 9] Internet-Draft LDPC-Staircase FEC Schemes July 2009 +----------------------+ | Application | +----------------------+ | ADU flow | (1) Application Data Unit (ADU) v +----------------------+ +----------------+ | FEC Framework | | | | |------------------------- >| FEC Scheme | |(2) Construct an ADU | (4) Source Symbols for | | | Block | this Source Block |(5) Perform FEC | |(3) Construct ADU Info| | Encoding | |(7) Construct FEC Src |< -------------------------| | | Packets and FEC |(6) Ex src FEC Payload Ids,| | | Repair Packets | Repair FEC Payload Ids,| | +----------------------+ Repair Symbols +----------------+ | | |(8) FEC Src |(8') FEC Repair | packets | packets v v +----------------------+ | Transport Layer | | (e.g., UDP ) | +----------------------+ Figure 1: Terminology used in this document (sender point of view). 3.2. Notations This document uses the following notations: Some of them are FEC scheme specific: k denotes the number of source symbols in a source block. max_k denotes the maximum number of source symbols for any source block. n_r denotes the number of repair symbols generated for a source block. n denotes the number of encoding symbols generated for a source block. Therefore: n = k + n_r. max_n denotes the maximum number of encoding symbols generated for any source block. Roca, et al. Expires January 4, 2010 [Page 10] Internet-Draft LDPC-Staircase FEC Schemes July 2009 E denotes the encoding symbol length in bytes. CR denotes the "code rate", i.e., the k/n ratio. N1 denotes the target number of "1s" per column in the left side of the parity check matrix. N1m3 denotes the value N1 - 3. G denotes the number of Repair Symbols in a given FEC Repair Packet. This value may differ between different FEC Repair Packets. a^^b denotes a raised to the power b. Some of them are FECFRAME framework specific: B denotes the number of ADUs per ADU block. max_B denotes the maximum number of ADUs for any ADU block. 3.3. Abbreviations This document uses the following abbreviations: ADU stands for Application Data Unit. ESI stands for Encoding Symbol ID. FFCI stands for FEC Framework Configuration Information. LDPC stands for Low Density Parity Check. RS stands for Reed-Solomon. MDS stands for Maximum Distance Separable code. Roca, et al. Expires January 4, 2010 [Page 11] Internet-Draft LDPC-Staircase FEC Schemes July 2009 4. Common Procedures Related to the ADU Block and Source Block Creation This section introduces the procedures that are used during the ADU block and the related Source Block creation, for the various FEC schemes considered. 4.1. Problem Statement and Related Constraints Several aspects must be considered, that impact the ADU Block and Source Block creations: o the distribution of ADU sizes for the ADU flow(s) protected by the FECFRAME instance; o the maximum source block size (max_k parameter); o the potential real-time constraints, that impact the maximum ADU block size, since the larger the block size, the larger the decoding delay; We now detail each of these aspects. In its most general form the FECFRAME framework and the LDPC- Staircase FEC schemes are meant to protect a set of independent flows. Since the flows have no relationship to one another, the ADU size of each flow will potentially vary significantly. Even in the special case of a single flow, the ADU sizes may largely vary (e.g., the various frames of a "Group of Pictures (GOP) of an H.264 flow can have different sizes). This diversity must be addressed by the source block creation procedure since the LDPC-Staircase FEC schemes require a constant encoding symbol size (E parameter). The maximum source block length in symbols, max_k, depends on several parameters: the code rate (CR), the Encoding Symbol ID (ESI) field length in the Explicit Source/Repair FEC Payload ID (16 bits), as well as possible internal codec limitations. More specifically, max_k cannot be larger than the following values, derived from the ESI field size limitation, for a given code rate: max1_k = 2^^(16 - ceil(Log2(1/CR))) Some common max1_k values are: o CR == 1 (no repair symbol): max1_k = 2^^16 = 65536 symbols o 1/2 <= CR < 1: max1_k = 2^^15 = 32,768 symbols Roca, et al. Expires January 4, 2010 [Page 12] Internet-Draft LDPC-Staircase FEC Schemes July 2009 o 1/4 <= CR < 1/2: max1_k = 2^^14 = 16,384 symbols Additionally, a codec MAY impose other limitations on the maximum block size, for instance, because of a limited working memory size. This decision MUST be clarified at implementation time, when the target use-case is known. This results in a max2_k limitation. Then, max_k is given by: max_k = min(max1_k, max2_k) Note that this calculation is only required at the coder, since the actual k parameter (k <= max_k) is communicated to the decoder through the Repair FEC Payload ID. The source ADU flows usually have real-time constraints. It means that the maximum number of ADUs of an ADU block must not exceed a certain threshold since it directly impacts the decoding delay. It is the role of the developer, who knows the ADU Flow(s) real-time features, to define an appropriate upper bound to the ADU Block size, max_B. 4.2. Source Block Creation During Source Block creation, the ADU block is always encoded as a single source block. The creation of the ADU Block MUST take into account the constraints mentioned in Section 4.1. More specifically, the sender first defines an appropriate E value, valid for the whole session duration and transmitted in the FSSI. Then the sender accumulates ADUs until either (1) B equals max_B, or (2) the corresponding k equals max_k. As a consequence, there are a total of B <= max_B ADUs in this ADU Block. Then, for the ADU i, with 0 <= i <= B-1, 3 bytes are prepended (Figure 2): o The first byte, FID[i] (Flow ID), contains the integer identifier associated to the source ADU flow to which this ADU belongs to. It is assumed that a single byte is sufficient, or said differently, that no more than 256 flows will be protected by a single instance of the FECFRAME framework. o The following two bytes, L[i] (Length), contain the length of this ADU, in network byte order (i.e., big endian). This length is for the ADU itself and does not include the FID[i], L[i], or Pad[i] fields. Zero padding is also added if needed, in field Pad[i], for alignment Roca, et al. Expires January 4, 2010 [Page 13] Internet-Draft LDPC-Staircase FEC Schemes July 2009 purposes on source symbol boundaries. This can happen at most once per ADU. The data unit resulting from the ADU and the F[], L[] and Pad[] fields, is called ADU Information (or ADUI). Thanks to the padding, a source symbol will never straddle several ADUIs. As a direct consequence, a source symbol will never straddle several FEC Source Packets. Enc Symbol Len (E) Enc Symbol Len (E) Enc Symbol Len (E) < ------------------ >< ------------------ >< ------------------ > +----+----+-----------------------+--------+ |F[0]|L[0]| R[0] | Pad[1] | +----+----+----------+------------+--------+ |F[1]|L[1]| R[1] | +----+----+----------+--------------------------------------+----+ |F[2]|L[2]| R[2] |P[2]| +----+----+----------+--------------------------------------+----+ |F[3]|L[3]| R[3] | P3| +----+----+------+---+ \_______________________________ _______________________________/ \/ global FEC encoding +--------------------+ | Repair 7 | +--------------------+ . . . . +--------------------+ | Repair 13 | +--------------------+ Figure 2: Source block creation with the global encoding scheme, for code rate 1/2 (equal number of source and repair symbols, 7 in this example). Note that neither the initial 3 bytes nor the optional padding are sent over the network. However, they are considered during FEC encoding. It means that a receiver who lost a certain FEC Source Packet (e.g., the UDP datagram containing this FEC source packet) will be able to recover the ADUI if FEC decoding succeeds. Thanks to the initial 3 bytes, this receiver will get rid of the padding (if any) and identify the corresponding ADU flow. Roca, et al. Expires January 4, 2010 [Page 14] Internet-Draft LDPC-Staircase FEC Schemes July 2009 5. LDPC-Staircase FEC Scheme for Arbitrary ADU Flows 5.1. Formats and Codes 5.1.1. FEC Framework Configuration Information The FEC Framework Configuration Information (or FFCI) includes information that MUST be communicated between the sender and receiver(s). More specifically, it enables the synchronization of the FECFRAME sender and receiver instances. It includes both mandatory elements and scheme-specific elements, as detailed below. 5.1.1.1. Mandatory Information o FEC Encoding ID: the value assigned to this fully-specified FEC scheme MUST be XXX, as assigned by IANA (Section 8). When SDP is used to communicate the FFCI, this FEC Encoding ID is carried in the 'encoding-id' parameter. 5.1.1.2. FEC Scheme-Specific Information The FEC Scheme Specific Information (FSSI) includes elements that are specific to the present FEC scheme. More precisely: PRNG seed: a non-negative 32 bit integer used as the seed of the Pseudo Random Number Generator, as defined in [RFC5170]. Encoding symbol length (E): a non-negative integer indicating the length of each encoding symbol in bytes. N1m3: an integer between 0 (default) and 7, inclusive. The number of "1s" per column in the left side of the parity check matrix, N1, is then equal to N1m3 + 3, as specified in [RFC5170]. The encoding format consists of the following 7 octet field: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | PRNG seed | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Encoding Symbol Length (E) | N1m3 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 3: FSSI encoding format. Roca, et al. Expires January 4, 2010 [Page 15] Internet-Draft LDPC-Staircase FEC Schemes July 2009 These elements are required both by the sender (LDPC-Staircase encoder) and the receiver(s) (LDPC-Staircase decoder). When SDP is used to communicate the FFCI, this FEC scheme-specific information is carried in the 'fssi' parameter as an opaque octet string, using a Base64 encoding, as specified in [SDP_ELEMENTS]. 5.1.2. Explicit Source FEC Payload ID A FEC source packet MUST contain an Explicit Source FEC Payload ID that is appended to the end of the packet as illustrated in Figure 4. +--------------------------------+ | IP Header | +--------------------------------+ | Transport Header | +--------------------------------+ | ADU | +--------------------------------+ | Explicit Source FEC Payload ID | +--------------------------------+ Figure 4: Structure of a FEC Source Packet with the Explicit Source FEC Payload ID. More precisely, the Explicit Source FEC Payload ID is composed of the Source Block Number and the Encoding Symbol ID (Figure 5): Source Block Number (SBN) (16 bit field): this field identifies the source block to which this FEC source packet belongs. Encoding Symbol ID (ESI) (16 bit field): this field identifies the first source symbol associated to this FEC source packet in the source block (remember there can be several source symbols per ADUI, Section 4.2). This value belongs to interval {0..k - 1} inclusive for source symbols. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Source Block Number (SBN) | Encoding Symbol ID (ESI) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 5: Source FEC Payload ID encoding format. Roca, et al. Expires January 4, 2010 [Page 16] Internet-Draft LDPC-Staircase FEC Schemes July 2009 5.1.3. Repair FEC Payload ID A FEC repair packet MUST contain a Repair FEC Payload ID that is prepended to the Repair Symbol(s) as illustrated in Figure 6. There can be several Repair Symbols per FEC Repair Packet as explained below. +--------------------------------+ | IP Header | +--------------------------------+ | Transport Header | +--------------------------------+ | Repair FEC Payload ID | +--------------------------------+ | Repair Symbol(s) | +--------------------------------+ Figure 6: Structure of a FEC Repair Packet with the Repair FEC Payload ID. More precisely, the Repair FEC Payload ID is composed of the Source Block Number, the Encoding Symbol ID and the Source Block Length (Figure 7): Source Block Number (SBN) (16 bit field): this field identifies the source block to which the FEC repair packet belongs. Encoding Symbol ID (ESI) (16 bit field) this field identifies the first repair symbol contained in this FEC repair packet (remember there can be several repair symbols per FEC repair packet). This value belongs to interval {k..n - 1} inclusive for repair symbols. Source Block Length (k) (16 bit field): this field provides the number of source symbols for this source block, i.e., the k parameter. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Source Block Number (SBN) | Encoding Symbol ID (ESI) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Source Block Length (k) | Number Encoding Symbols (n) | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 7: Repair FEC Payload ID encoding format. The number of Repair Symbols for a given FEC Repair Packet, G, is Roca, et al. Expires January 4, 2010 [Page 17] Internet-Draft LDPC-Staircase FEC Schemes July 2009 defined as follows. A sender can choose a G > 1 in order to limit the transmission overhead due to the various protocol headers. However G MUST be such that the corresponding IP datagram size does not exceed the maximum Path Maximum Transmission Unit (or PMTU). The G value is not communicated as such to the receiver(s). However a receiver can easily calculate G by dividing the FEC Repair Packet size (minus the Repair FEC Payload ID size) by the E parameter. Another aspect is to define which Repair Symbols are contained in a given FEC Repair Packet. In any case, the Repair FEC Payload ID of a packet always refers to the first Repair Symbol. At a sender, the remaining Repair Symbols can be deduced from the ESI of the first Repair Symbol by using the sender_find_ESIs_of_group() function, as specified in [RFC5170]. At a receiver, the other Repair Symbols can be deduced from the ESI of the first Repair Symbol by using the receiver_find_ESIs_of_group() function, as specified in [RFC5170]. By using these functions, the Repair Symbols considered for a given FEC Repair Packet are not in sequence. The motivation is to avoid loosing several, in sequence, Repair Symbols, since this situation is known to negatively impact erasure recover capabilities. 5.2. Procedures The following procedures apply: o The source block creation procedures are specified in Section 4.2. o The SBN value is incremented for each new source block, starting at 0 for the first block of the ADU flow. Wrapping to zero will happen for long sessions, after value 2^^(16)-1. o The ESI of encoding symbols is managed sequentially, starting at 0 for the first symbol. The first k values (from 0 to k - 1 inclusive) identify source symbols, whereas the last n-k values (from k to n - 1 inclusive) identify repair symbols. o The FEC repair packet creation procedures are specified in Section 5.1.3. 5.3. FEC Code Specification The present document inherits from [RFC5170] the specification of the core LDPC-Staircase codes for a packet erasure transmission channel. Roca, et al. Expires January 4, 2010 [Page 18] Internet-Draft LDPC-Staircase FEC Schemes July 2009 6. LDPC-Staircase FEC Scheme for a Single Sequenced Flow TBD Roca, et al. Expires January 4, 2010 [Page 19] Internet-Draft LDPC-Staircase FEC Schemes July 2009 7. Security Considerations 7.1. Problem Statement A content delivery system is potentially subject to many attacks. Some of them target the network (e.g., to compromise the routing infrastructure, by compromising the congestion control component), others target the Content Delivery Protocol (CDP) (e.g., to compromise its normal behavior), and finally some attacks target the content itself. Since this document focuses on various FEC schemes, this section only discusses the additional threats that their use within the FECFRAME framework can create to an arbitrary CDP. More specifically, these attacks may have several goals: o those that are meant to give access to a confidential content (e.g., in case of a non-free content), o those that try to corrupt the ADU Flows being transmitted (e.g., to prevent a receiver from using it), o and those that try to compromise the receiver's behavior (e.g., by making the decoding of an object computationally expensive). These attacks can be launched either against the data flow itself (e.g. by sending forged FEC Source/Repair Packets) or against the FEC parameters that are sent either in-band (e.g., in the Repair FEC Payload ID) or out-of-band (e.g., in a session description). 7.2. Attacks Against the Data Flow First of all, let us consider the attacks against the data flow. 7.2.1. Access to Confidential Objects Access control to the ADU Flow being transmitted is typically provided by means of encryption. This encryption can be done within the content provider itself, by the application (for instance by using the Secure Real-time Transport Protocol (SRTP) [RFC3711]), or at the Network Layer, on a packet per packet basis when IPSec/ESP is used [RFC4303]. If access control is a concern, it is RECOMMENDED that one of these solutions be used. Even if we mention these attacks here, they are not related nor facilitated by the use of FEC. 7.2.2. Content Corruption Protection against corruptions (e.g., after sending forged FEC Source/Repair Packets) is achieved by means of a content integrity Roca, et al. Expires January 4, 2010 [Page 20] Internet-Draft LDPC-Staircase FEC Schemes July 2009 verification/sender authentication scheme. This service is usually provided at the packet level. In this case, after removing all forged packets, the ADU Flow may be sometimes recovered. Several techniques can provide this source authentication/content integrity service: o at the application level, the Secure Real-time Transport Protocol (SRTP) [RFC3711] provides several solutions to verify the authenticate and check the integrity of RTP and RTCP messages, among other services. For instance, associated to the Timed Efficient Stream Loss-Tolerant Authentication (TESLA) [RFC4383], SRTP is an attractive solution that is robust to losses, provides a true authentication/integrity service, and does not create any prohibitive processing load or transmission overhead. Yet, checking a packet requires a small delay (a second or more) after its reception with TESLA. Other building blocks can be used within SRTP to provide authentication/content integrity services. o at the Network Layer, IPSec/AH offers an integrity verification mechanism that can be used to provide authentication/content integrity services. Techniques relying on public key cryptography (digital signatures and TESLA during the bootstrap process, when used) require that public keys be securely associated to the entities. This can be achieved by a Public Key Infrastructure (PKI), or by a PGP Web of Trust, or by pre-distributing the public keys of each group member. Techniques relying on symmetric key cryptography (group MAC) require that a secret key be shared by all group members. This can be achieved by means of a group key management protocol, or simply by pre-distributing the secret key (but this manual solution has many limitations). It is up to the developer and deployer, who know the security requirements and features of the target application area, to define which solution is the most appropriate. Nonetheless, in case there is any concern of the threat of object corruption, it is RECOMMENDED that at least one of these techniques be used. 7.3. Attacks Against the FEC Parameters Let us now consider attacks against the FEC parameters included in the FFCI that are usually sent out-of-band (e.g., in a session description). Attacks on these FEC parameters can prevent the decoding of the associated object. For instance modifying the PRNG seed or N1m3 fields will lead a receiver to consider a different parity check matrix, i.e., a different code. Modifying the E Roca, et al. Expires January 4, 2010 [Page 21] Internet-Draft LDPC-Staircase FEC Schemes July 2009 parameter will lead a receiver to consider bad Repair Symbols for a received FEC Repair Packet. It is therefore RECOMMENDED that security measures be taken to guarantee the FFCI integrity. When the FFCI is sent out-of-band in a session description, this latter SHOULD be protected, for instance by digitally signing it. The same considerations concerning the key management aspects apply here also. Roca, et al. Expires January 4, 2010 [Page 22] Internet-Draft LDPC-Staircase FEC Schemes July 2009 8. IANA Considerations Values of FEC Encoding IDs are subject to IANA registration. TBD... Roca, et al. Expires January 4, 2010 [Page 23] Internet-Draft LDPC-Staircase FEC Schemes July 2009 9. Acknowledgments TBD Roca, et al. Expires January 4, 2010 [Page 24] Internet-Draft LDPC-Staircase FEC Schemes July 2009 10. References 10.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119. [RFC5170] Roca, V., Neumann, C., and D. Furodet, "Low Density Parity Check (LDPC) Forward Error Correction", RFC 5170, June 2008. [FECFRAME-FRAMEWORK] Watson, M., "Forward Error Correction (FEC) Framework", draft-ietf-fecframe-framework-03 (Work in Progress), October 2008. [SDP_ELEMENTS] Begen, A., "SDP Elements for FEC Framework", draft-ietf-fecframe-sdp-elements-03 (Work in Progress), June 2009. 10.2. Informative References [RFC3453] Luby, M., Vicisano, L., Gemmell, J., Rizzo, L., Handley, M., and J. Crowcroft, "The Use of Forward Error Correction (FEC) in Reliable Multicast", RFC 3453, December 2002. [RFC5052] Watson, M., Luby, M., and L. Vicisano, "Forward Error Correction (FEC) Building Block", RFC 5052, August 2007. [RFC5510] Lacan, J., Roca, V., Peltotalo, J., and S. Peltotalo, "Reed-Solomon Forward Error Correction (FEC) Schemes", RFC 5510, April 2009. [RFC5053] Luby, M., Shokrollahi, A., Watson, M., and T. Stockhammer, "Raptor Forward Error Correction Scheme", RFC 5053, June 2007. [RMT-PI-ALC] Luby, M., Watson, M., and L. Vicisano, "Asynchronous Layered Coding (ALC) Protocol Instantiation", Work in Progress, November 2007. [RMT-PI-NORM] Adamson, B., Bormann, C., Handley, M., and J. Macker, "Negative-acknowledgment (NACK)-Oriented Reliable Multicast (NORM) Protocol", Work in Progress, May 2008. Roca, et al. Expires January 4, 2010 [Page 25] Internet-Draft LDPC-Staircase FEC Schemes July 2009 [SPSC08] Cunche, M. and V. Roca, "Optimizing the Error Recovery Capabilities of LDPC-staircase Codes Featuring a Gaussian Elimination Decoding Scheme", 10th IEEE International Workshop on Signal Processing for Space Communications (SPSC'08), October 2008. [LDPC-codec] Cunche, M., Roca, V., Neumann, C., and J. Laboure, "LDPC- Staircase/LDPC-Triangle Codec Reference Implementation", INRIA Rhone-Alpes and STMicroelectronics, . [RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)", RFC 4303, December 2005. [RFC3711] Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K. Norrman, "The Secure Real-time Transport Protocol (SRTP)", RFC 3711, March 2004. [RFC4383] Baugher, M. and E. Carrara, "The Use of Timed Efficient Stream Loss-Tolerant Authentication (TESLA) in the Secure Real- time Transport Protocol (SRTP)", RFC 4383, February 2006. Roca, et al. Expires January 4, 2010 [Page 26] Internet-Draft LDPC-Staircase FEC Schemes July 2009 Authors' Addresses Vincent Roca INRIA 655, av. de l'Europe Inovallee; Montbonnot ST ISMIER cedex 38334 France Email: vincent.roca@inria.fr URI: http://planete.inrialpes.fr/people/roca/ Mathieu Cunche INRIA 655, av. de l'Europe Inovallee; Montbonnot ST ISMIER cedex 38334 France Email: mathieu.cunche@inria.fr URI: http://planete.inrialpes.fr/people/cunche/ Jerome Lacan ISAE/LAAS-CNRS 1, place Emile Blouin Toulouse 31056 France Email: jerome.lacan@isae.fr URI: http://dmi.ensica.fr/auteur.php3?id_auteur=5 Roca, et al. Expires January 4, 2010 [Page 27]